Technical datasheet
Electrophoresis
EPS-650R
Rechargeable Electrophoresis Power Supply
80 to 650 V from an internal lithium-ion pack. A full day of runs, with or without mains power.
The EPS-650R is a high-voltage electrophoresis power supply built around a 12 Ah lithium-ion battery. It holds a set voltage to within one volt, meters current continuously and ends every run on a timer, so hemoglobin, serum protein and agarose separations finish cleanly even when the grid does not cooperate.
| Voltage range | 80–650 V DC, 1 V steps |
|---|---|
| Current metering | 0–150 mA, 0.1 mA resolution |
| Maximum power | 60 W |
| Outputs | 2 parallel pairs, shrouded 4 mm safety sockets |
| Timer | 1 min to 99 h 59 min, automatic stop |
| Protection | Lid interlock, over-current, open-circuit and short-circuit detection, output bleeder |
| Battery | 11.1 V, 12 Ah lithium-ion with integrated management |
|---|---|
| Typical runtime | Up to 10 hours at hemoglobin electrophoresis loads |
| Charging | 12.6 V DC adapter, 100–240 V AC 50/60 Hz input; operates while charging |
| Charge time | Approximately 6 hours from empty |
| Display | High-contrast display with volts, milliamps, time and battery |
|---|---|
| Controls | Rotary encoder, Start, Stop and Mode keys, audible alarm |
| Dimensions | 260 × 230 × 141 mm (W × D × H, with handle) |
| Weight | 3.4 kg |
| Operating environment | 10–40 °C, up to 85% RH non-condensing |
IN THE BOX
- EPS-650R power supply
- Mains charging adapter with regional plug
- Interlock lead
- Quick start guide