EPS-650R
Rechargeable Electrophoresis Power Supply
80 to 650 V from an internal lithium-ion pack. A full day of runs, with or without mains power.
- Regulated DC output
- 80–650 V
- Regulated DC output
- Internal Li-ion battery
- 12 Ah
- Internal Li-ion battery
- Independent output pairs
- 2
- Independent output pairs
Buying through a local partner? Find a distributor
Overview
The EPS-650R is a high-voltage electrophoresis power supply built around a 12 Ah lithium-ion battery. It holds a set voltage to within one volt, meters current continuously and ends every run on a timer, so hemoglobin, serum protein and agarose separations finish cleanly even when the grid does not cooperate.
Uninterrupted runs, on the bench or in the field
Mains interruptions are the most common reason an electrophoresis run is repeated. The EPS-650R runs from its own battery and charges while it works, so a power cut never resets a run. The same unit goes into a vehicle or a community screening site without an inverter or generator.
Measured, not estimated
Output voltage and current are measured by a dedicated precision converter, not inferred from a dial position. The display shows live volts, milliamps, elapsed time and remaining battery, and the instrument alarms if current falls to zero (an open circuit or a dry tank) or rises past the limit you set.
Safety designed into the hardware
High voltage is only enabled when the tank lid interlock is closed. A hardware indicator shows when the output is live, independently of the firmware, and a bleeder network discharges the output within seconds of a stop. Outputs use shrouded 4 mm safety sockets.
Specifications
Full technical data is in the datasheet.
| Voltage range | 80–650 V DC, 1 V steps |
|---|---|
| Current metering | 0–150 mA, 0.1 mA resolution |
| Maximum power | 60 W |
| Outputs | 2 parallel pairs, shrouded 4 mm safety sockets |
| Timer | 1 min to 99 h 59 min, automatic stop |
| Protection | Lid interlock, over-current, open-circuit and short-circuit detection, output bleeder |
| Battery | 11.1 V, 12 Ah lithium-ion with integrated management |
|---|---|
| Typical runtime | Up to 10 hours at hemoglobin electrophoresis loads |
| Charging | 12.6 V DC adapter, 100–240 V AC 50/60 Hz input; operates while charging |
| Charge time | Approximately 6 hours from empty |
| Display | High-contrast display with volts, milliamps, time and battery |
|---|---|
| Controls | Rotary encoder, Start, Stop and Mode keys, audible alarm |
| Dimensions | 260 × 230 × 141 mm (W × D × H, with handle) |
| Weight | 3.4 kg |
| Operating environment | 10–40 °C, up to 85% RH non-condensing |
APPLICATIONS
- Hemoglobin electrophoresis on cellulose acetate
- Serum protein electrophoresis
- Agarose gel electrophoresis of DNA and RNA
- Community and mobile screening programs
IN THE BOX
- EPS-650R power supply
- Mains charging adapter with regional plug
- Interlock lead
- Quick start guide
INTENDED USE
Laboratory power supply for electrophoretic separation. For use by trained laboratory personnel.
Regulatory status varies by country. Contact us for registration documents and certificates for your market.
Request a quotation for the EPS-650R.
Quotations include delivery to your facility, installation options and operator training. Volume and tender pricing is available for hospital groups and public programs.